Wall-Mount MRx -S/P

Philips offers a wide range of defibrillators. We have developed various mounts for these products; rigid wall and vehicle mounts, swivelling wall and vehicle mounts and a stretcher / bed mount. These are described in more detail on the following pages.

Wall-Mount MRx -S/P

Wall-Mount MRx -S/P

Features:

Unlocking with just one hand
Easy handling
Small installation depth
Low weight
Can be swivelled by 60°
Available with and without charging functionality
Versions: Stainless steel (V2A) and coated (individual colours possible)

Further information is given in “Product information”.

Product information

Mount MRx -S/P

A functional, compact, very light and secure mount for the PHILIPS MRx defibrillator with intuitive operation from MCS medical concept solutions GmbH.

The mount can be swivelled by 60°, it has three positions (left, middle and right) and has an active charging functionality. In addition, the mount has been tested for safety by the 20G crash test in accordance with DIN EN 1789:2014 and EASA CS-27.

Technical data:

W 220 mm x H 420 mm x D 140 mm

Weight: 6,0 Kg

Note:

The charger is not included in the scope of supply. Contact your field service salesman from Philips.

The mount is available in the following versions:

Mount

Description

Part number

Mount

Wall-Mount MRx S/P with charging functionality

Description

Rotatable mount (60°) with charging functionality

Colour: Stainless steel

Part number

MCS752001

Wall-Mount MRx S/P (with charging functionality)

Rotatable mount (60°) with charging functionality

Colour: Stainless steel

MCS752001

Mount

Wall-Mount MRx S/P without charging functionality

Description

Rotatable mount (60°) without charging functionality

Colour: Stainless steel

Part number

MCS752000

Wall-Mount MRx S/P (without charging functionality)

Rotatable mount (60°) without charging functionality

Colour: Stainless steel

MCS752000

Accessories

Description

Part number

Accessorie

Description

This installation plate from MCS permits the mounting / adaptation of the mount for the Philips MRx defibrillators on carrier rails. The installation is simple and quick. Fasten the plate by placing the claws on the rails and locking the handles (4 pieces). The mount for the defibrillator is installed with a few hand grips by fixing it to the installation plate with 4 bolts. This plate is tested with 20G crash.

Part number

MCS701500

This installation plate from MCS permits the mounting / adaptation of the mount for the Philips MRx defibrillators on carrier rails. The installation is simple and quick. Fasten the plate by placing the claws on the rails and locking the handles (4 pieces). The mount for the defibrillator is installed with a few hand grips by fixing it to the installation plate with 4 bolts. This plate is tested with 20G crash.

MCS701500